Warranty: | 12monthes |
---|---|
Material: | Stailness Steel |
Power Supply: | 380V Three Phase |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Item | Description | Data |
1 | Automatic Vacuum Feeding Machine | 1 set |
2. | Single Screw Extruder | 1 set |
Screw Material | Bimetallic | |
Surface Treatment of Screw and Barrel | Nitriding, ground | |
Heating Mode of Barrel: | Cast-aluminium Heating Circles | |
Cooling Mode | Air-Blower | |
Speed Control | Frequency Conversion Control | |
3 | Gearbox Reducer | 1 set |
Gear Material and Type | 20CrMnTi, Helical Gear | |
Gear Surface Treatment | Quenching | |
Bearings | Famous Imported Brands | |
4 | Vacuum Calibrating Tank | 1 set |
Length of Tank | 6000mm | |
Thickness of Tank | 3mm | |
Tank Material | Excellent Stainless Steel | |
5 | Water Spraying Cooling Tank | 1 set |
Length of Tank | 6000mm | |
Tank Material | Excellent Stainless Steel | |
Cooling Method | Enforced Water Spraying | |
6 | Hauling-off Machine | 1 set |
Hauling-off Method | Caterpillar | |
Pressing Method | Pneumatic Pressing | |
Speed Control | JapanOmron Frequency Conversion Control | |
No. of Caterpillar | 2(under 110mm), 3(125-250mm), 4(255-400mm), 6(above 400mm) | |
7 | Cutting Machine with Length Pre-setting Device | 1 set |
Cutting Method | Blade Cutting/ Nonscrape Cutting(under160mm), Planetary Cutting (above 160mm) | |
Pressing Method | Pneumatic | |
Can be PLC Controlled | ||
8 | Pipe Colier or Stacker | 1 set |
Pipe Colier | Applies to Dia(under 110mm) | |
Stacker | Applies to Dia(above 110mm) | |
Stacker Length | 6000mm | |
9 | Electrical Cabinet | 1 set |
Main Electrical Components | Omron, ABB, Schneider, Delix, RKC etc. |
V. Trade Terms |
Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable Delivery Time: 40 days after receipt of prepayment. Packing Method: Packing film or wooden case Guaranteed Time: 12 months |
VI. Machine Test and After Service |
When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container. When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable. |
Suppliers with verified business licenses