PVC Double Pipe Production Extrusion Machine Line (SJSZ51)
Introduction:
This plastic machine is PVC double pipe extrusion line. This line can produce two PVC pipes at same time to increase the production efficiency.The include one extruder, one mould (for two pipe), two sets of calibration tanks, two haul off machine, two cutters.
Application of pvc pipes made from pvc pipe machine:
PVC PIPES are applied to agricultural and construction water supply and drainage, overhead or underground wire and cable.
Due to the special characteristics of the CPVC plastic pipes, they are widely used in the fields of crude oil transportation, pipe lines of chemical industry which require high temperature and corrosion resistance, hot and lukewarm water supply and drainage system, directly buried pipes of high and extra high voltage electricity, protection sleeves of wires and cables, etc.
Features of PVC pipe machine:
1. Machine parts for the pvc pipe machine with good quality:
This production line consists of conical double-screw extruder, vacuum sizing platform, tractor, cutting machine, stacker, etc.
2.The electricity parts for the pvc pipe machine are all the best:
The conical double-screw extruder and tractor adopts AC frequency control speed regulator. Vacuum pump and tractor adopts high-quality products.
3. The die of the PVC pipe machine is made with special mold material,
You can change size sleeving to make different diameter for the pvc pipes
4.The cooling tank is 6 meters length, the size of cooling tank will be designed differently accoriding to the pipe size.
5.The hauling off device for the pvc pipe machine are designed in good constructure:
Tractors can be divided into up and down pedrail, three-claw, four-claw, six-claw, etc. In terms of thickness and diameter of the pipe.
6.The cutter for the pvc pipe machine is designed for different diameter:
The cutter has two modes of cutting such as blade and planet type. Additionally, metering device is equipped. The property of the production line is reliable and the output is high.
| Machine Type |
Raw Material |
Diameter Range |
Voltage |
Output |
| SJSZ51x105 |
PVC Powder |
12-50mm |
380V/3P |
80-150kg/h
|
TRADE TERMS
- Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable
- Delivery Time: 40 days after receipt of prepayment.
- Packing Method: Packing film or wooden case
- Guaranteed Time: 12 months
MACHINERUNNING TEST AND AFTER SERVICE
- When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.
- When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.
- If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours.
COMPANY SHOW:
Audited Supplier 
){kind=link}
){kind=link}