PVC WPC Foam Wall Panel/Bamboo Wooden Fiber Wall Panel/ Ceiling Panel Extrusion Making Machine
----Machine Introduction----
Extrusion Line is used to produce PVC/WPC wall panel with different size, such as 300mm, 400mm, 500mm, 600mm wide, etc.
Changeing some of parts, this line can also produce wpc profile.
According to the didferent formula, should mix the PVC powder with additives in a ratio. After mixing, put the raw material into the extruder by screw feeder. By heating and mixing in extruder, the raw material will change to fluid and extruded into mould. Out of mould, wall panel will be shaped and cooling by platform. Through the tractor, cutting machine, finial end on collect platform for packing.
----Machine Features----
1. Cutter is equipped with PLC control system. which helps with setting the length and precise cutting.
2. Good Brand, ABB frequency, SIEMENS motor, Schneider buttons, OMRON temperature controller.
3. Screw and barrel are from jinxing company, which is the best supplier in china.
4. The speed reducer is from jiagnyin company,etc.
----Equipment List----
Equipment list of PVC WPC Decoration Wall Panel Extrusion Production Line
| No |
Item |
Quantity |
| 1 |
screw feeder |
1 unit |
| 2 |
SJSZ65x132 twin screw extruder |
1unit |
| 3 |
Extrusion Mould |
1set |
| 4 |
Calibration paltfrom |
1 unit |
| 5 |
Haul-off Machine |
1 unit |
| 6 |
Cutting machine |
1 unit |
| 7 |
Collect platform |
1 unit |
Auxiliary machine for option:
1. SWP 400 Crusher
2. 300/600 Mixer
3. SMP400 Pulverizer
4. 10P chiller.
Audited Supplier 
){kind=link}
){kind=link}